summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-03-18Add vLLM model presets and live model switchingPaul Buetow
- New [vllm.presets.*] TOML section with two presets: qwen3-coder-next bullpoint/Qwen3-Coder-Next-AWQ-4bit (256k ctx, coding) nemotron-super solidrust/Llama-3.3-Nemotron-Super-49B-v1-AWQ (131k ctx, analysis) - New CLI subcommand: `model list` — show presets, mark the active one - New CLI subcommand: `model switch PRESET [--dry-run]` — switch the running VM to a different preset without redeploying: 1. stops old Docker container (if container_name differs) 2. starts new container and waits for model readiness 3. hot-reloads LiteLLM config via litellm_reload_script (no venv reinstall) 4. updates state file with new vllm_model / vllm_container_name / vllm_preset - New `create --model PRESET` flag — deploy with a non-default preset - vllm_install_script and litellm_install_script now accept preset_config:/ model_override: so callers can override individual fields without duplicating the full config - State file now tracks vllm_container_name and vllm_preset for clean container lifecycle management across switches Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
2026-03-18Use hyperstack.wg1 hostname instead of hardcoded IP in READMEPaul Buetow
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
2026-03-18Add vLLM + LiteLLM support; rename script; add READMEPaul Buetow
- Replace Ollama (disabled by default) with vLLM Docker container + LiteLLM Anthropic-API proxy as the default inference backend - vLLM setup: pulls vllm/vllm-openai, starts container on port 11434, polls until model is loaded (up to 10 min for first 45 GB download) - LiteLLM setup: installs in Python venv, writes config mapping Claude model aliases to the vLLM model, runs as a systemd service on port 4000 - New CLI flags on `create`: --vllm/--no-vllm, --ollama/--no-ollama to override config at runtime - New `test` command: end-to-end inference test over WireGuard against vLLM (/v1/models + /v1/chat/completions) and LiteLLM (/v1/messages) - UFW rules now open both port 11434 (inference) and 4000 (LiteLLM) from the WireGuard subnet - Rename hyperstack_vm.rb → hyperstack.rb - Add README.md with quickstart, Claude Code / OpenCode usage, CLI reference, monitoring commands, and VRAM sizing notes - Add vllm-setup.txt: detailed manual setup notes and architecture docs Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
2026-03-16Update hyperstack VM bootstrap, WireGuard, and Ollama setup logic; add ↵Paul Buetow
retries, apt lock waits, and model verification
2026-03-15cleanupPaul Buetow
2026-03-15Add Hyperstack VM automation and model defaultsPaul Buetow
2026-03-14Update project config, remove CLAUDE.md, add Gemfile and Rakefile for rcmPaul Buetow
2026-02-15cleanup of old zone template files and RexfilePaul Buetow
2026-02-15Use Recreate strategy for syncthing to avoid file lock conflictsPaul Buetow
Changed deployment strategy from RollingUpdate to Recreate to prevent file lock conflicts when using RWO volumes. Syncthing uses file locks in the config directory, so only one pod can access it at a time. Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
2026-02-15Add health probes to syncthing deployment to auto-recover from stale NFS mountsPaul Buetow
Added startup, liveness, and readiness probes to the syncthing deployment. The liveness probe will automatically restart the pod when it becomes unresponsive due to stale NFS file handles, preventing filesystem errors and service disruptions. Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
2026-02-15Remove AGENTS.md and add Serena project configurationPaul Buetow
Removed AGENTS.md as it is no longer referenced in the project. Added .serena/ directory with project configuration for Serena AI agent. Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
2026-02-15Add health probes to registry deployment to auto-recover from stale NFS mountsPaul Buetow
Added startup, liveness, and readiness probes to the docker registry deployment. The liveness probe will automatically restart the pod when it returns 503 errors (which happens when NFS storage becomes stale), preventing prolonged ImagePullBackOff issues for dependent services like radicale and git-server. Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
2026-02-08docs(pihole): add DNS toggle script documentation and improve setup instructionsPaul Buetow
Added quick toggle script section to README with usage examples. Reorganized client configuration into quick toggle (recommended) and manual sections for better clarity. The toggle script provides an easy way to enable/disable Pi-hole DNS on Fedora laptops without remembering NetworkManager commands. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-08joPaul Buetow
2026-02-08Upgrade immich to v2.5.5 latest stable releasePaul Buetow
Updated immich-server and immich-machine-learning images to v2.5.5. This release includes major features: - Free Up Space functionality - Non-destructive photo editing - Database backup and restore via web - Upload improvements and visual refresh - Progressive JPEGs support - Additional fine-grained API key permissions Release notes: https://github.com/immich-app/immich/releases/tag/v2.5.5
2026-02-08Add immich LAN ingress and remove unsupported helm configPaul Buetow
- Created custom ingress-lan.yaml for immich.f3s.lan.buetow.org with TLS - Removed unsupported 'lan' ingress config from ArgoCD app values - The Immich Helm chart doesn't support multiple named ingresses, so we create the LAN ingress as a custom resource instead This aligns immich with other services that have both regular and LAN ingress endpoints.
2026-02-08doesnt belong herePaul Buetow
2026-02-08Merge remote changes and keep PostgreSQL health checksPaul Buetow
2026-02-08Add PostgreSQL health checks to fix immich pod restartsPaul Buetow
Added liveness and readiness probes to the PostgreSQL deployment to ensure it's ready to accept connections before immich-server attempts to connect. This fixes the race condition causing ECONNREFUSED errors and pod restarts. The readiness probe prevents services from routing traffic until PostgreSQL is fully initialized, while the liveness probe ensures the container is restarted if PostgreSQL becomes unresponsive.
2026-02-07docs(git-server): update README with persistent SSH keys infoPaul Buetow
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07fix(git-server): copy SSH keys from NFS to local emptyDirPaul Buetow
OpenSSH refuses to load host keys from NFS for security reasons. The solution is to store keys in persistent NFS (so they survive restarts) but copy them to a local emptyDir at startup (so sshd can read them). This ensures: - SSH host keys persist across pod restarts - sshd can successfully load the keys from local storage - Clients don't see "host key changed" warnings Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07fix(git-server): add sshd_config to persistent storagePaul Buetow
The sshd_config file needs to be in the persistent SSH directory for the git-server container to start properly. Added ConfigMap and updated initContainer to copy it on first deployment. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07fix(git-server): persist SSH host keys across pod restartsPaul Buetow
SSH host keys are now stored in persistent NFS storage instead of ephemeral emptyDir. Keys are only generated once on first deployment, preventing known_hosts updates on every pod restart. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07feat: add LAN ingresses for all servicesPaul Buetow
Add *.f3s.lan.buetow.org ingress resources for all services to enable LAN access with TLS termination. This allows direct access from the 192.168.1.0/24 network through the FreeBSD CARP/relayd setup. Services updated: - argocd: argocd.f3s.lan.buetow.org - cgit: cgit.f3s.lan.buetow.org - grafana: grafana.f3s.lan.buetow.org - anki-sync-server: anki.f3s.lan.buetow.org - apache: f3s.lan.buetow.org, www.f3s.lan.buetow.org, standby.f3s.lan.buetow.org - audiobookshelf: audiobookshelf.f3s.lan.buetow.org - filebrowser: filebrowser.f3s.lan.buetow.org - immich: immich.f3s.lan.buetow.org - ipv6test: ipv6test.f3s.lan.buetow.org (+ ipv4/ipv6 subdomains) - keybr: keybr.f3s.lan.buetow.org - koreader-sync-server: koreader.f3s.lan.buetow.org - miniflux: flux.f3s.lan.buetow.org - opodsync: gpodder.f3s.lan.buetow.org - radicale: radicale.f3s.lan.buetow.org - syncthing: syncthing.f3s.lan.buetow.org - tracing-demo: tracing-demo.f3s.lan.buetow.org - wallabag: bag.f3s.lan.buetow.org - webdav: webdav.f3s.lan.buetow.org All LAN ingresses use: - TLS with f3s-lan-tls certificate (cert-manager) - Traefik entrypoints: web,websecure - Same backend services as external ingresses Also fixed koreader-sync-server ingress to use modern annotations. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07docs(agents): add note about pushing to internal git serverPaul Buetow
Add reminder to push changes to r0 for ArgoCD sync and note about accepting new SSH host keys. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07docs(pihole): add DNS client configuration guidePaul Buetow
Document how to configure clients to use Pi-hole DNS: - NetworkManager configuration for Linux/Fedora - Multiple DNS servers with automatic failover - Firefox DoH configuration notes - Verification steps Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07feat(pihole): add LAN DNS access via externalIPPaul Buetow
Configure Pi-hole DNS service to bind to 192.168.1.120 for LAN access. This allows clients on the 192.168.1.0/24 network to use Pi-hole as their DNS server without needing to be on the Wireguard mesh. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07fix(pihole): use correct helm parameter for existing secretPaul Buetow
The pihole helm chart uses 'admin.existingSecret' not 'adminPasswordSecret'. This ensures the deployment uses the pihole-admin-password secret instead of creating a default 'pihole-password' secret with 'admin' password. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07fix(pihole): add Traefik middleware to redirect root to /admin/Paul Buetow
Pi-hole's web interface returns 403 Forbidden when accessed via the root path. Add a Traefik middleware that redirects requests to the root URL to /admin/ path where the web interface is accessible. Also add the pihole ArgoCD application manifest. Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-07add piholePaul Buetow
2026-02-07add ingress for piholePaul Buetow
2026-02-06joPaul Buetow
2026-02-06Add Traefik ingresses for jellyfin (external and LAN with TLS)Paul Buetow
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-06fix(jellyfin): move values.yaml to helm-chart directoryPaul Buetow
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-06Restore jellyfin helm-chart and ArgoCD applicationPaul Buetow
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-05Add end-to-end test results for LAN accessPaul Buetow
2026-02-05Update Navidrome LAN ingress to use TLS with cert-manager certificatePaul Buetow
2026-02-05Add LAN access via CARP and relaydPaul Buetow
- Add cert-manager for self-signed TLS certificates - Create wildcard cert for *.f3s.lan.buetow.org - Add LAN ingress to Navidrome (navidrome.f3s.lan.buetow.org) - Document FreeBSD relayd configuration for LAN access - Add comprehensive setup guide LAN access uses existing CARP VIP (192.168.1.138) on f0/f1 with relayd forwarding HTTP/HTTPS to k3s Traefik NodePorts. External access via OpenBSD relayd continues unchanged.
2026-02-04add navidromePaul Buetow
2026-02-04Add Navidrome music server deploymentPaul Buetow
Adds Navidrome music streaming server with: - Helm chart with deployment, service, ingress, and persistent volumes - Two PVs: data (10Gi) and music library (200Gi) - ArgoCD application for automated deployment - Ingress at navidrome.f3s.buetow.org - Justfile for operational commands
2026-02-03Update ipv6test to 1.6.2 with fixed non-root permissionsPaul Buetow
Fix Apache PidFile and cgid ScriptSock paths for non-root user.
2026-02-03Update ipv6test to enforce non-root runtime.Paul Buetow
Switch the container to an unprivileged UID/GID and update probes for port 8080.
2026-02-03UpdatePaul Buetow
2026-02-01HelloPaul Buetow
2026-02-01addPaul Buetow
2026-02-01Preserve prompt spacing on send-back.Paul Buetow
Keep the first-line prefix strip without trimming spaces.
2026-02-01Refactor tmux-edit-send and document helpers.Paul Buetow
Add function comments and optional logging toggle.
2026-02-01Capture multiline prompt input in popup editor.Paul Buetow
Parse boxed prompt lines and join wrapped text for prefill.
2026-02-01Strip prefilled prompt from first line.Paul Buetow
Avoid sending duplicated prompt text back to the pane.
2026-02-01Prefill editor from cursor-agent prompt line.Paul Buetow
Capture the last prompt line and seed the temp file for editing.
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-15 19:06:44 +0000