From 4d2e2a870fbf5e3ba60fc88f6c7a394baf8ae6db Mon Sep 17 00:00:00 2001 From: Paul Buetow Date: Tue, 30 Dec 2025 10:17:31 +0200 Subject: Update content for html --- gemfeed/atom.xml | 175 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 141 insertions(+), 34 deletions(-) (limited to 'gemfeed/atom.xml') diff --git a/gemfeed/atom.xml b/gemfeed/atom.xml index 7e7f3733..09efca2f 100644 --- a/gemfeed/atom.xml +++ b/gemfeed/atom.xml @@ -1,6 +1,6 @@ - 2025-12-26T23:33:35+02:00 + 2025-12-30T10:15:58+02:00 foo.zone feed To be in the .zone! @@ -2579,7 +2579,7 @@ p hash.values_at(:a, :c) f3s: Kubernetes with FreeBSD - Part 7: k3s and first pod deployments https://foo.zone/gemfeed/2025-10-02-f3s-kubernetes-with-freebsd-part-7.html - 2025-10-02T11:27:19+03:00 + 2025-10-02T11:27:19+03:00, last updated Tue 30 Dec 10:11:58 EET 2025 Paul Buetow aka snonux paul@dev.buetow.org @@ -2589,7 +2589,7 @@ p hash.values_at(:a, :c)

f3s: Kubernetes with FreeBSD - Part 7: k3s and first pod deployments



-Published at 2025-10-02T11:27:19+03:00
+Published at 2025-10-02T11:27:19+03:00, last updated Tue 30 Dec 10:11:58 EET 2025

This is the seventh blog post about the f3s series for my self-hosting demands in a home lab. f3s? The "f" stands for FreeBSD, and the "3s" stands for k3s, the Kubernetes distribution I use on FreeBSD-based physical machines.

@@ -2619,6 +2619,8 @@ p hash.values_at(:a, :c)
  • ⇢ ⇢ Scaling Traefik for faster failover
  • ⇢ Make it accessible from the public internet
  • ⇢ ⇢ OpenBSD relayd configuration
    • +
  • ⇢ ⇢ Automatic failover when f3s cluster is down
    • +
  • ⇢ ⇢ OpenBSD httpd fallback configuration
  • ⇢ Deploying the private Docker image registry
  • ⇢ ⇢ Prepare the NFS-backed storage
  • ⇢ ⇢ Install (or upgrade) the chart
    • @@ -3248,10 +3250,11 @@ table <f3s> { }
    -Inside the http protocol "https" block each public hostname gets its Let's Encrypt certificate and is matched to that backend table. Besides the primary trio, every service-specific hostname (anki, bag, flux, audiobookshelf, gpodder, radicale, vault, syncthing, uprecords) and their www / standby aliases reuse the same pool so new apps can go live just by publishing an ingress rule, whereas they will all map to a service running in k3s:
    +Inside the http protocol "https" block each public hostname gets its Let's Encrypt certificate. The protocol configures TLS keypairs for all f3s services and other public endpoints. For f3s hosts specifically, there are no explicit forward to rules in the protocol—they use the relay-level failover mechanism described later. Non-f3s hosts get explicit localhost routing to prevent them from trying the f3s backends:

     http protocol "https" {
+    # TLS certificates for all f3s services
     tls keypair f3s.foo.zone
     tls keypair www.f3s.foo.zone
     tls keypair standby.f3s.foo.zone
@@ -3283,36 +3286,15 @@ http protocol "https" {
     tls keypair www.uprecords.f3s.foo.zone
     tls keypair standby.uprecords.f3s.foo.zone
 
-    match request quick header "Host" value "f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "anki.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.anki.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.anki.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "bag.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.bag.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.bag.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "flux.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.flux.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.flux.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "audiobookshelf.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.audiobookshelf.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.audiobookshelf.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "gpodder.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.gpodder.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.gpodder.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "radicale.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.radicale.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.radicale.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "vault.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.vault.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.vault.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "syncthing.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.syncthing.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.syncthing.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "uprecords.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "www.uprecords.f3s.foo.zone" forward to <f3s>
-    match request quick header "Host" value "standby.uprecords.f3s.foo.zone" forward to <f3s>
+    # Explicitly route non-f3s hosts to localhost
+    match request header "Host" value "foo.zone" forward to <localhost>
+    match request header "Host" value "www.foo.zone" forward to <localhost>
+    match request header "Host" value "dtail.dev" forward to <localhost>
+    # ... other non-f3s hosts ...
+
+    # NOTE: f3s hosts have NO match rules here!
+    # They use relay-level failover (f3s -> localhost backup)
+    # See the relay configuration below for automatic failover details
 }

    @@ -3322,18 +3304,143 @@ http protocol "https" { relay "https4" { listen on 46.23.94.99 port 443 tls protocol "https" + # Primary: f3s cluster (with health checks) - Falls back to localhost when all hosts down forward to <f3s> port 80 check tcp + forward to <localhost> port 8080 } relay "https6" { listen on 2a03:6000:6f67:624::99 port 443 tls protocol "https" + # Primary: f3s cluster (with health checks) - Falls back to localhost when all hosts down forward to <f3s> port 80 check tcp + forward to <localhost> port 8080 }
    In practice, that means relayd terminates TLS with the correct certificate, keeps the three WireGuard-connected backends in rotation, and ships each request to whichever bhyve VM answers first.

    +

    Automatic failover when f3s cluster is down


    +
    +Update: This section was added at Tue 30 Dec 10:11:44 EET 2025
    +
    +One important aspect of this setup is graceful degradation: when all three f3s nodes are unreachable (e.g., during maintenance or a power outage in my LAN), users should see a friendly status page instead of an error message.
    +
    +OpenBSD's relayd supports automatic failover through its health check mechanism. According to the relayd.conf manual:
    +
    +This directive can be specified multiple times - subsequent entries will be used as the backup table if all hosts in the previous table are down.
    +
    +The key is the order of forward to statements in the relay configuration. By placing the f3s table first with check tcp health checks, followed by localhost as a backup, relayd automatically routes traffic based on backend availability:
    +
    +When f3s cluster is UP:
    +
    +
      +
    • Health checks on port 80 succeed for f3s nodes
      • +
    • All f3s traffic routes to the Kubernetes cluster
      • +
    • Localhost backup remains idle
      • +

    +When f3s cluster is DOWN:
    +
    +
      +
    • All health checks fail (nodes unreachable)
      • +
    • The <f3s> table becomes unavailable
      • +
    • Traffic automatically falls back to <localhost> on port 8080
      • +
    • OpenBSD's httpd serves a static fallback page
      • +

    +
    +# NEW configuration - supports automatic failover
+http protocol "https" {
+    # Explicitly route non-f3s hosts to localhost
+    match request header "Host" value "foo.zone" forward to <localhost>
+    match request header "Host" value "dtail.dev" forward to <localhost>
+    # ... other non-f3s hosts ...
+
+    # f3s hosts have NO protocol rules - they use relay-level failover
+    # (no match rules for f3s.foo.zone, anki.f3s.foo.zone, etc.)
+}
+
+relay "https4" {
+    # f3s FIRST (with health checks), localhost as BACKUP
+    forward to <f3s> port 80 check tcp
+    forward to <localhost> port 8080
+}
+
    +
    +This way, f3s traffic uses the relay's default behavior: try the first table, fall back to the second when health checks fail.
    +
    +

    OpenBSD httpd fallback configuration


    +
    +The localhost httpd service on port 8080 serves the fallback content from /var/www/htdocs/f3s_fallback/. This directory contains a simple HTML page explaining the situation:
    +
    +
    +# OpenBSD httpd.conf
+# Fallback for f3s hosts
+server "f3s.foo.zone" {
+  listen on * port 8080
+  log style forwarded
+  location * {
+    root "/htdocs/f3s_fallback"
+    directory auto index
+  }
+}
+
+server "anki.f3s.foo.zone" {
+  listen on * port 8080
+  log style forwarded
+  location * {
+    root "/htdocs/f3s_fallback"
+    directory auto index
+  }
+}
+
+# ... similar blocks for all f3s hostnames ...
+
    +
    +The fallback page itself is straightforward:
    +
    + +
    <!DOCTYPE html>
+<html>
+<head>
+    <title>Server turned off</title>
+    <style>
+        body {
+            font-family: sans-serif;
+            text-align: center;
+            padding-top: 50px;
+        }
+        .container {
+            max-width: 600px;
+            margin: 0 auto;
+        }
+    </style>
+</head>
+<body>
+    <div class="container">
+        <h1>Server turned off</h1>
+        <p>The servers are all currently turned off.</p>
+        <p>Please try again later.</p>
+        <p>Or email <a href="mailto:paul@nospam.buetow.org">paul@nospam.buetow.org</a>
+           - so I can turn them back on for you!</p>
+    </div>
+</body>
+</html>
+
    +
    +This approach provides several benefits:
    +
    +
      +
    • Automatic detection: Health checks run continuously; no manual intervention needed
      • +
    • Instant fallback: When all f3s nodes go down, the next request automatically routes to localhost
      • +
    • Transparent recovery: When f3s comes back online, health checks pass and traffic resumes automatically
      • +
    • User experience: Visitors see a helpful message instead of connection errors
      • +
    • No DNS changes: The same hostnames work whether f3s is up or down
      • +

    +This fallback mechanism has proven invaluable during maintenance windows and unexpected outages, ensuring that users always get a response even when the home lab is offline.
    +

    Deploying the private Docker image registry



    As not all Docker images I want to deploy are available on public Docker registries and as I also build some of them by myself, there is the need of a private registry.
    -- cgit v1.2.3