From 61b45d1b5ecb039e420f58dce5817fe723ec5a00 Mon Sep 17 00:00:00 2001 From: Paul Buetow Date: Sat, 18 May 2024 13:24:42 +0300 Subject: Update content for gemtext --- gemfeed/atom.xml | 1122 +++++++++++++++++++++++++++--------------------------- 1 file changed, 561 insertions(+), 561 deletions(-) (limited to 'gemfeed/atom.xml') diff --git a/gemfeed/atom.xml b/gemfeed/atom.xml index 18190139..e2bcfa70 100644 --- a/gemfeed/atom.xml +++ b/gemfeed/atom.xml @@ -1,6 +1,6 @@ - 2024-05-12T14:48:38+03:00 + 2024-05-18T13:15:08+03:00 foo.zone feed To be in the .zone! @@ -232,12 +232,12 @@ Projects I currently don't have time for by Lorenzo Bettini http://www.lorenzobettini.it http://www.gnu.org/software/src-highlite --> -
Cluster :UK, :uk01 do
-  Customer.C1A1.segments.volumes.each do |volume|
-    puts volume.usage_stats
-    volume.move_off! if volume.over_subscribed?
-  end
-end
+
Cluster :UK, :uk01 do
+  Customer.C1A1.segments.volumes.each do |volume|
+    puts volume.usage_stats
+    volume.move_off! if volume.over_subscribed?
+  end
+end
 

 

 I am abandoning this project because my workplace has stopped the annual pet project competition, and I have other more important projects to work on at the moment.

@@ -599,38 +599,38 @@ KISS high-availability with OpenBSD
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/bin/ksh
-
-ZONES_DIR=/var/nsd/zones/master/
-DEFAULT_MASTER=fishfinger.buetow.org
-DEFAULT_STANDBY=blowfish.buetow.org
-
-determine_master_and_standby () {
-    local master=$DEFAULT_MASTER
-    local standby=$DEFAULT_STANDBY
-
-    .
-    .
-    .
-    
-    local -i health_ok=1
-    if ! ftp -4 -o - https://$master/index.txt | grep -q "Welcome to $master"; then
-        echo "https://$master/index.txt IPv4 health check failed"
-        health_ok=0
-    elif ! ftp -6 -o - https://$master/index.txt | grep -q "Welcome to $master"; then
-        echo "https://$master/index.txt IPv6 health check failed"
-        health_ok=0
-    fi
-    if [ $health_ok -eq 0 ]; then
-        local tmp=$master
-        master=$standby
-        standby=$tmp
-    fi
-
-    .
-    .
-    .
-}
+
#!/bin/ksh
+
+ZONES_DIR=/var/nsd/zones/master/
+DEFAULT_MASTER=fishfinger.buetow.org
+DEFAULT_STANDBY=blowfish.buetow.org
+
+determine_master_and_standby () {
+    local master=$DEFAULT_MASTER
+    local standby=$DEFAULT_STANDBY
+
+    .
+    .
+    .
+    
+    local -i health_ok=1
+    if ! ftp -4 -o - https://$master/index.txt | grep -q "Welcome to $master"; then
+        echo "https://$master/index.txt IPv4 health check failed"
+        health_ok=0
+    elif ! ftp -6 -o - https://$master/index.txt | grep -q "Welcome to $master"; then
+        echo "https://$master/index.txt IPv6 health check failed"
+        health_ok=0
+    fi
+    if [ $health_ok -eq 0 ]; then
+        local tmp=$master
+        master=$standby
+        standby=$tmp
+    fi
+
+    .
+    .
+    .
+}
 

 

 The failover scripts looks for the  ; Enable failover string in the DNS zone files and swaps the A and AAAA records of the DNS entries accordingly:

@@ -639,42 +639,42 @@ http://www.gnu.org/software/src-highlite -->
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
fishfinger$ grep failover /var/nsd/zones/master/foo.zone.zone
-        300 IN A 46.23.94.99 ; Enable failover
-        300 IN AAAA 2a03:6000:6f67:624::99 ; Enable failover
-www     300 IN A 46.23.94.99 ; Enable failover
-www     300 IN AAAA 2a03:6000:6f67:624::99 ; Enable failover
-standby  300 IN A 23.88.35.144 ; Enable failover
-standby  300 IN AAAA 2a01:4f8:c17:20f1::42 ; Enable failover
+
fishfinger$ grep failover /var/nsd/zones/master/foo.zone.zone
+        300 IN A 46.23.94.99 ; Enable failover
+        300 IN AAAA 2a03:6000:6f67:624::99 ; Enable failover
+www     300 IN A 46.23.94.99 ; Enable failover
+www     300 IN AAAA 2a03:6000:6f67:624::99 ; Enable failover
+standby  300 IN A 23.88.35.144 ; Enable failover
+standby  300 IN AAAA 2a01:4f8:c17:20f1::42 ; Enable failover
 

 

 
-
transform () {
-  sed -E '
-	/IN A .*; Enable failover/ {
-	    /^standby/! {
-	        s/^(.*) 300 IN A (.*) ; (.*)/\1 300 IN A '$(cat /var/nsd/run/master_a)' ; \3/;
-	    }
-	    /^standby/ {
-	        s/^(.*) 300 IN A (.*) ; (.*)/\1 300 IN A '$(cat /var/nsd/run/standby_a)' ; \3/;
-	    }
-	}
-	/IN AAAA .*; Enable failover/ {
-	    /^standby/! {
-	        s/^(.*) 300 IN AAAA (.*) ; (.*)/\1 300 IN AAAA '$(cat /var/nsd/run/master_aaaa)' ; \3/;
-	    }
-	    /^standby/ {
-	        s/^(.*) 300 IN AAAA (.*) ; (.*)/\1 300 IN AAAA '$(cat /var/nsd/run/standby_aaaa)' ; \3/;
-	    }
-	}
-	/ ; serial/ {
-	    s/^( +) ([0-9]+) .*; (.*)/\1 '$(date +%s)' ; \3/;
-	}
-  '
-}
+
transform () {
+  sed -E '
+	/IN A .*; Enable failover/ {
+	    /^standby/! {
+	        s/^(.*) 300 IN A (.*) ; (.*)/\1 300 IN A '$(cat /var/nsd/run/master_a)' ; \3/;
+	    }
+	    /^standby/ {
+	        s/^(.*) 300 IN A (.*) ; (.*)/\1 300 IN A '$(cat /var/nsd/run/standby_a)' ; \3/;
+	    }
+	}
+	/IN AAAA .*; Enable failover/ {
+	    /^standby/! {
+	        s/^(.*) 300 IN AAAA (.*) ; (.*)/\1 300 IN AAAA '$(cat /var/nsd/run/master_aaaa)' ; \3/;
+	    }
+	    /^standby/ {
+	        s/^(.*) 300 IN AAAA (.*) ; (.*)/\1 300 IN AAAA '$(cat /var/nsd/run/standby_aaaa)' ; \3/;
+	    }
+	}
+	/ ; serial/ {
+	    s/^( +) ([0-9]+) .*; (.*)/\1 '$(date +%s)' ; \3/;
+	}
+  '
+}
 

 

 After the failover, the script reloads nsd and performs a sanity check to see if DNS still works. If not, a rollback will be performed:

@@ -683,48 +683,48 @@ http://www.gnu.org/software/src-highlite -->
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#! Race condition !#
-   
-if [ -f $zone_file.bak ]; then
-    mv $zone_file.bak $zone_file
-fi
-
-cat $zone_file | transform > $zone_file.new.tmp 
-
-grep -v ' ; serial' $zone_file.new.tmp > $zone_file.new.noserial.tmp
-grep -v ' ; serial' $zone_file > $zone_file.old.noserial.tmp
-
-echo "Has zone $zone_file changed?"
-if diff -u $zone_file.old.noserial.tmp $zone_file.new.noserial.tmp; then
-    echo "The zone $zone_file hasn't changed"
-    rm $zone_file.*.tmp
-    return 0
-fi
-
-cp $zone_file $zone_file.bak
-mv $zone_file.new.tmp $zone_file
-rm $zone_file.*.tmp
-echo "Reloading nsd"
-nsd-control reload
-
-if ! zone_is_ok $zone; then
-    echo "Rolling back $zone_file changes"
-    cp $zone_file $zone_file.invalid
-    mv $zone_file.bak $zone_file
-    echo "Reloading nsd"
-    nsd-control reload
-    zone_is_ok $zone
-    return 3
-fi
-
-for cleanup in invalid bak; do
-    if [ -f $zone_file.$cleanup ]; then
-        rm $zone_file.$cleanup
-    fi
-done
-
-echo "Failover of zone $zone to $MASTER completed"
-return 1
+
#! Race condition !#
+   
+if [ -f $zone_file.bak ]; then
+    mv $zone_file.bak $zone_file
+fi
+
+cat $zone_file | transform > $zone_file.new.tmp 
+
+grep -v ' ; serial' $zone_file.new.tmp > $zone_file.new.noserial.tmp
+grep -v ' ; serial' $zone_file > $zone_file.old.noserial.tmp
+
+echo "Has zone $zone_file changed?"
+if diff -u $zone_file.old.noserial.tmp $zone_file.new.noserial.tmp; then
+    echo "The zone $zone_file hasn't changed"
+    rm $zone_file.*.tmp
+    return 0
+fi
+
+cp $zone_file $zone_file.bak
+mv $zone_file.new.tmp $zone_file
+rm $zone_file.*.tmp
+echo "Reloading nsd"
+nsd-control reload
+
+if ! zone_is_ok $zone; then
+    echo "Rolling back $zone_file changes"
+    cp $zone_file $zone_file.invalid
+    mv $zone_file.bak $zone_file
+    echo "Reloading nsd"
+    nsd-control reload
+    zone_is_ok $zone
+    return 3
+fi
+
+for cleanup in invalid bak; do
+    if [ -f $zone_file.$cleanup ]; then
+        rm $zone_file.$cleanup
+    fi
+done
+
+echo "Failover of zone $zone to $MASTER completed"
+return 1
 

 

 A non-zero return code (here, 3 when a rollback and 1 when a DNS failover was performed) will cause CRON to send an E-Mail with the whole script output.

@@ -781,13 +781,13 @@ echo "Failover of zone $zone to $MASTER completed"
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
# Weekly auto-failover for Let's Encrypt automation
-local -i -r week_of_the_year=$(date +%U)
-if [ $(( week_of_the_year % 2 )) -eq 0 ]; then
-    local tmp=$master
-    master=$standby
-    standby=$tmp
-fi
+
# Weekly auto-failover for Let's Encrypt automation
+local -i -r week_of_the_year=$(date +%U)
+if [ $(( week_of_the_year % 2 )) -eq 0 ]; then
+    local tmp=$master
+    master=$standby
+    standby=$tmp
+fi
 

 

 This way, a DNS failover is performed weekly so that the ACME automation can update the Let's Encrypt certificates (for master and standby) before they expire on each VM.

@@ -1133,8 +1133,8 @@ SSFISHKISSFISHKISSFISHKISSFISHKIS    SFIS
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
$ doas installboot sd0 # Update the bootloader (not for every upgrade required)
-$ doas sysupgrade # Update all binaries (including Kernel)
+
$ doas installboot sd0 # Update the bootloader (not for every upgrade required)
+$ doas sysupgrade # Update all binaries (including Kernel)
 

 

 sysupgrade downloaded and upgraded to the next release and rebooted the system. After the reboot, I run:

@@ -1143,9 +1143,9 @@ $ doas sysupgrade # Update all binaries (including Kern
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
$ doas sysmerge # Update system configuration files
-$ doas pkg_add -u # Update all packages
-$ doas reboot # Just in case, reboot one more time
+
$ doas sysmerge # Update system configuration files
+$ doas pkg_add -u # Update all packages
+$ doas reboot # Just in case, reboot one more time
 

 

 That's it! Took me around 5 minutes in total! No issues, only these few comands, only 5 minutes! It just works! No problems, no conflicts, no tons (actually none) config file merge conflicts.

@@ -1289,24 +1289,24 @@ jgs^^^^^^^`^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-log () {
-    local -r level="$1"; shift
-    local -r message="$1"; shift
-    local -i pid="$$"
+log () {
+    local -r level="$1"; shift
+    local -r message="$1"; shift
+    local -i pid="$$"
 
-    local -r callee=${FUNCNAME[1]}
-    local -r stamp=$(date +%Y%m%d-%H%M%S)
+    local -r callee=${FUNCNAME[1]}
+    local -r stamp=$(date +%Y%m%d-%H%M%S)
 
-    echo "$level|$stamp|$pid|$callee|$message" >&2
-}
+    echo "$level|$stamp|$pid|$callee|$message" >&2
+}
 
-at_home_friday_evening () {
-    log INFO 'One Peperoni Pizza, please'
-}
+at_home_friday_evening () {
+    log INFO 'One Peperoni Pizza, please'
+}
 
-at_home_friday_evening
+at_home_friday_evening
 

 

 The output is as follows:

@@ -1315,8 +1315,8 @@ at_home_friday_evening
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
❯ ./logexample.sh
-INFO|20231210-082732|123002|at_home_friday_evening|One Peperoni Pizza, please
+
❯ ./logexample.sh
+INFO|20231210-082732|123002|at_home_friday_evening|One Peperoni Pizza, please
 

 

 
:(){ :|:& };:


@@ -1350,18 +1350,18 @@ INFO|20231210-
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-outer() {
-  inner() {
-    echo 'Intel inside!'
-  }
-  inner
-}
+outer() {
+  inner() {
+    echo 'Intel inside!'
+  }
+  inner
+}
 
-inner
-outer
-inner
+inner
+outer
+inner
 

 

 And let's execute it:

@@ -1379,26 +1379,26 @@ Intel inside!
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-outer1() {
-  inner() {
-    echo 'Intel inside!'
-  }
-  inner
-}
+outer1() {
+  inner() {
+    echo 'Intel inside!'
+  }
+  inner
+}
 
-outer2() {
-  inner() {
-    echo 'Wintel inside!'
-  }
-  inner
-}
+outer2() {
+  inner() {
+    echo 'Wintel inside!'
+  }
+  inner
+}
 
-outer1
-inner
-outer2
-inner
+outer1
+inner
+outer2
+inner
 

 

 And let's run it:

@@ -1419,14 +1419,14 @@ Wintel inside!
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-some_expensive_operations() {
-  echo "Doing expensive operations with '$1' from pid $$"
-}
+some_expensive_operations() {
+  echo "Doing expensive operations with '$1' from pid $$"
+}
 
-for i in {0..9}; do echo $i; done \
-  | xargs -P10 -I{} bash -c 'some_expensive_operations "{}"'
+for i in {0..9}; do echo $i; done \
+  | xargs -P10 -I{} bash -c 'some_expensive_operations "{}"'
 

 

 We try here to run ten parallel processes; each of them should run the some_expensive_operations function with a different argument. The arguments are provided to xargs through STDIN one per line. When executed, we get this:

@@ -1451,15 +1451,15 @@ bash: line 1: some_expensive_operations: command not found
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-some_expensive_operations() {
-  echo "Doing expensive operations with '$1' from pid $$"
-}
-export -f some_expensive_operations
+some_expensive_operations() {
+  echo "Doing expensive operations with '$1' from pid $$"
+}
+export -f some_expensive_operations
 
-for i in {0..9}; do echo $i; done \
-  | xargs -P10 -I{} bash -c 'some_expensive_operations "{}"'
+for i in {0..9}; do echo $i; done \
+  | xargs -P10 -I{} bash -c 'some_expensive_operations "{}"'
 

 

 When we run this now, we get:

@@ -1484,19 +1484,19 @@ Doing expensive operations with '9' from pid 132840
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-some_other_function() {
-  echo "$1"
-}
+some_other_function() {
+  echo "$1"
+}
 
-some_expensive_operations() {
-  some_other_function "Doing expensive operations with '$1' from pid $$"
-}
-export -f some_expensive_operations
+some_expensive_operations() {
+  some_other_function "Doing expensive operations with '$1' from pid $$"
+}
+export -f some_expensive_operations
 
-for i in {0..9}; do echo $i; done \
-  | xargs -P10 -I{} bash -c 'some_expensive_operations "{}"'
+for i in {0..9}; do echo $i; done \
+  | xargs -P10 -I{} bash -c 'some_expensive_operations "{}"'
 

 

 ... because some_other_function isn't exported! You will also need to add an export -f some_other_function!

@@ -1509,22 +1509,22 @@ http://www.gnu.org/software/src-highlite -->
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-foo() {
-  local foo=bar # Declare local/dynamic variable
-  bar
-  echo "$foo"
-}
+foo() {
+  local foo=bar # Declare local/dynamic variable
+  bar
+  echo "$foo"
+}
 
-bar() {
-  echo "$foo"
-  foo=baz
-}
+bar() {
+  echo "$foo"
+  foo=baz
+}
 
-foo=foo # Declare global variable
-foo # Call function foo
-echo "$foo"
+foo=foo # Declare global variable
+foo # Call function foo
+echo "$foo"
 

 

 Let's pause a minute. What do you think the output would be?

@@ -1549,34 +1549,34 @@ foo
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-declare -r foo=foo
-declare -r bar=bar
+declare -r foo=foo
+declare -r bar=bar
 
-if [ "$foo" = foo ]; then
-  if [ "$bar" = bar ]; then
-    echo ok1
-  fi
-fi
+if [ "$foo" = foo ]; then
+  if [ "$bar" = bar ]; then
+    echo ok1
+  fi
+fi
 
-if [ "$foo" = foo ] && [ "$bar" == bar ]; then
-  echo ok2a
-fi
+if [ "$foo" = foo ] && [ "$bar" == bar ]; then
+  echo ok2a
+fi
 
-[ "$foo" = foo ] && [ "$bar" == bar ] && echo ok2b
+[ "$foo" = foo ] && [ "$bar" == bar ] && echo ok2b
 
-if [[ "$foo" = foo && "$bar" == bar ]]; then
-  echo ok3a
-fi
+if [[ "$foo" = foo && "$bar" == bar ]]; then
+  echo ok3a
+fi
 
- [[ "$foo" = foo && "$bar" == bar ]] && echo ok3b
+ [[ "$foo" = foo && "$bar" == bar ]] && echo ok3b
 
-if test "$foo" = foo && test "$bar" = bar; then
-  echo ok4a
-fi
+if test "$foo" = foo && test "$bar" = bar; then
+  echo ok4a
+fi
 
-test "$foo" = foo && test "$bar" = bar && echo ok4b
+test "$foo" = foo && test "$bar" = bar && echo ok4b
 

 

 The output we get is:

@@ -1600,18 +1600,18 @@ ok4b
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-# Single line comment
+# Single line comment
 
-# These are two single line
-# comments one after another
+# These are two single line
+# comments one after another
 
-: <<COMMENT
-This is another way a
-multi line comment
-could be written!
-COMMENT
+: <<COMMENT
+This is another way a
+multi line comment
+could be written!
+COMMENT
 

 

 I will not demonstrate the execution of this script, as it won't print anything! It's obviously not the most pretty way of commenting on your code, but it could sometimes be handy!

@@ -1624,11 +1624,11 @@ COMMENT
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
#!/usr/bin/env bash
+
#!/usr/bin/env bash
 
-echo foo
-echo echo baz >> $0
-echo bar
+echo foo
+echo echo baz >> $0
+echo bar
 

 

 When it is run, it will do:

@@ -1977,42 +1977,42 @@ photoalbum makemake
 by Lorenzo Bettini
 http://www.lorenzobettini.it
 http://www.gnu.org/software/src-highlite -->
-
% photoalbum makemake
-You may now customize ./photoalbumrc and run make
-
-% cat Makefile
-all:
-	photoalbum generate photoalbumrc
-clean:
-	photoalbum clean photoalbumrc
-
-% cat photoalbumrc
-# The title of the photoalbum
-TITLE='A simple Photoalbum'