Mergebuild-010393-lambda

1 files changed, 0 insertions, 377 deletions

diff --git a/examples/all-examples.txt b/examples/all-examples.txt
deleted file mode 100644
index f71e8a2..0000000
--- a/examples/all-examples.txt
+++ /dev/null
@@ -1,377 +0,0 @@
-
-#*
- * Examples of how to use bitwise operators
- *#
-
-# Prints "01\n"
-assert 0 == (put 1 and 0); 
-assert 1 == (say 1 and 1); 
-
-# Prints "01\n"
-assert 0 == (put 0 or 0);
-assert 1 == (say 0 or 1);
-
-# Prints "01\n"
-assert 0 == (put 1 xor 1);
-assert 1 == (say 1 xor 0);
-
-# Prints "82\n"
-assert 8 == (put 2 :< 2);
-assert 2 == (say 8 :> 2);
-
-# A bit more complex, prints "9\n"
-assert 9 == (say 1 :< 5 :> 5 or 2 and 5 xor 8);
-
-# Same result, but with parenthesis:
-assert 9 == (say ((((1 :< 5) :> 5) or 2) and 5) xor 8);
-
-# Different parenthesis, different result: "1\n"
-assert 1 == (say 1 :< 5 :> 5 or 2 and (5 xor 8));
-
-# Prints "-1" 
-assert (neg 1) == (say neg not 0);
-
-
-#*
- * Simple examples how to write comments
- *#
-
-# This is a single lined comment
-
-say 1 + 1; # This is a comment at the end of the line
-
-say 1 #* This is an embedded comment *# + 1;
-
-#* This is
-	a
-		multiline
-			comment *#
-
-#* 
- * This is
- * a nicer looking
- * multiline comment
- *#
-
-
-#* 
- * Simple conditional tests
- *#
-
-# "0010\n"
-assert 0 == (put 1 < 1); 
-assert 0 == (put 1 < 0); 
-assert 1 == (put 0 < 1); 
-assert 0 == (say 0 < 0);
-
-# "0100\n"
-assert 0 == (put 1 > 1); 
-assert 1 == (put 1 > 0); 
-assert 0 == (put 0 > 1); 
-assert 0 == (say 0 > 0);
-
-# "1001\n"
-assert 1 == (put 1 == 1); 
-assert 0 == (put 1 == 0); 
-assert 0 == (put 0 == 1);
-assert 1 == (say 0 == 0);
- 
-# "0110\n"
-assert 0 == (put 1 != 1);
-assert 1 == (put 1 != 0); 
-assert 1 == (put 0 != 1); 
-assert 0 == (say 0 != 0);
-
-# "1011\n"
-assert 1 == (put 1 <= 1); 
-assert 0 == (put 1 <= 0); 
-assert 1 == (put 0 <= 1); 
-assert 1 == (say 0 <= 0);
-
-## "1101\n"
-assert 1 == (put 1 >= 1); 
-assert 1 == (put 1 >= 0); 
-assert 0 == (put 0 >= 1); 
-assert 1 == (say 0 >= 0);
-
-
-
-#*
- * Examples of how to use control statements
- *#
-
-if 1 { 
-	say "if 1";
-} 
-
-ifnot 0 == 1 { 
-	say "ifnot 0 == 1";
-} 
-
-# Calculate 10!
-
-my n = 10, fac = 0;
-
-while n > 1 {
-	ifnot fac {
-		fac = 1;
-	}
-	say fac = (fac * n);
-	decr n;
-}
-
-# Count up to 10
-
-n = 0;
-
-until n == 10 {
-	say incr n;
-}
-
-
-#* 
- * Simple expression tests
- *#
-
-# Result 10 
-assert 10 == say (8 / 2) + 2 * 3; 
-
-# Result 12 
-assert 12 == say 2 * (4 + 2);  
-
-# Result 4 
-assert 4 == say 2 * (4 / 2);  
-
-# Result 4 
-assert 4 == say 2 * (4 / 2);  
-
-# Result 4 
-assert 4 == say 2 * (4 / 2);  
-
-# Result 46 
-assert 46 == say "12" + "34";
-
-# Result 1231
-assert 1231 == say "1234" - "3";
-
-# Result 24
-assert "24" == say "2ab" * "12";
-
-# Result 5.0
-assert 5 == say "10 bla" / 2;
-
-
-#*
- * Examples of how to use fork
- *#
-
-my pid = fork;
-
-if pid {
-	put "I am the parent process and the child has the pid ";
-	say pid;
-}
-
-ifnot pid {
-	say "I am the child process";
-}
-
-#*
- * Examples of how to use functions
- *#
-
-func foo {
-	say 1 + a * 3 + b;
-
-	func bar {
-		say "Hello i am nested";
-	}
-
-	bar; # Calling nested
-}
-
-my a = 2, b = 4; # Create global variables
-foo;
-assert 0 == (defined bar); # bar is not available anymore
-
-func baz {
-	say "I am baz";
-	undef baz; 
-}
-
-baz; # Baz deletes itself
-assert 0 == (defined baz); # baz is not available anymore
-
-#*
- * Simple builtin function tests
- *#
-
-# Print "-20\n"
-assert (neg 20) == (say neg 20);
-
-# Print "30\n"
-assert 30 == (say 10 - neg 20);
-
-# Print "-30\n"
-assert (neg 30) == (say neg neg neg 10 - neg 20);
-
-# Print "Hello\n"
-put "Hello";
-ln;
-
-# Exit with exit code 0
-exit 10 + 10 - 5 - 15;
-
-
-#*
- * Simple I/O examples. Currently only output is supported.
- *#
-
-# Print out 10 followed by a newline
-say 10; 
-
-# Print out 20 without a newline followed
-put 20;
-
-# Print out a newline
-ln;
-
-
-#*
- * Examples of how to use procedures
- *#
-
-proc foo {
-	say 1 + a * 3 + b;
-	my c = 6;
-}
-
-my a = 2, b = 4;
-
-foo; # Run the procedure. Print out "11\n"
-say c; # Print out "6\n";
-
-proc bar {
-	say "I am bar";
-
-	undef baz;
-
-	proc baz {
-		say "I am baz";
-	}
-}
-
-# Here bar would produce an error because the proc is not yet defined!
-# bar; 
-
-bar; # Here the procedure bar will define the procedure baz!
-baz; # Now the procedure baz is defined!
-bar; # Here the procedure bar will redefine baz again!
-
-#*
- * Examples of how to use scopeing
- *#
-
-my foo = 1;
-
-{
-	# Prints out 1
-	assert 1 == (put defined foo);
-
-	{
-		my bar = 2;
-
-		# Prints out 1
-		assert 1 == (put defined bar);
-
-		# Prints out all available symbols at
-		# the current program position.
-		scope;
-	}
-
-	# Prints out 0
-	assert 0 == (put defined bar);
-
-	my baz = 3;
-}
-
-# Prints out 0
-assert 0 == (say defined bar);
-
-
-
-#*
- * Examples of how to use synonyms
- *#
-
-# Create a variable foo, and bar is a synonym for foo
-my foo = "foo";
-my bar = \foo;
-
-# Reset the value of foo
-foo = "bar";
-
-# The synonym variable should now also set to "bar"
-assert "bar" == say bar;
-
-# Create a new procedure baz
-proc baz { 
-	say "I am baz";
-}
-
-# Make a synonym baz, and undefine baz
-my bay = \baz;
-
-# Should be the num of syms for the same value
-assert 2 == syms baz;
-assert 2 == syms bay;
-undef baz;
-assert 1 == syms bay;
-
-# bay still has a reference of the original procedure baz
-bay; # this prints aut "I am baz" 
-
-assert 0 == defined baz;
-assert 1 == defined bay;
-
-# This removes the procedure from memory
-undef bay; 
-
-
-#*
- * Examples how to convert types
- *#
-
-assert 1 == say 1; # Integer output
-
-assert 1 == say double 1; # Double output
-
-assert 14 == say 1 + string 13; # Implicit type conversion to Integer
-
-assert 2 == say integer 2.8; # Rounds down to the Integer 2
-
-assert say integer double string put say neg 12; # Nonsense but working :)
-
-
-#*
- * Examples of how to define variables
- *#
-
-# Defines the variables 
-my foo = 1 + 1;
-my bar = 4 - 1, baz = 100 + 1, bay;
-
-# bay has been initialized with the default value of 0
-say bay;
-
-# Prints out "5\n"
-assert 5 == (say foo + bar);
-
-# Pritns out "51101\n"
-assert 51 == (put baz - 50);
-assert 101 == (say baz);
-
-# Change the value of the variable to 99 and print it out
-assert 99 == (baz = 99);
-say baz;
-